LC Meters
PROVEN THE MOST RELIABLE METER SINCE 1954
Liquid Controls positive displacement meters are engineered to provide an accurate, trouble-free service life requiring minimal maintenance. The unique construction of the LC meters results in low pressure drop for most liquids, delivering superior performance and minimal demand on system pumps.
The exclusive LC metering element eliminates inaccuracies, minimizes loads on bearings, and performs equally in forward or reverse flow. The tri-rotor meter design consists of a precision machined housing in which three rotors turn and measure fuel in synchronized relationship, with no metal-to-metal contact, providing a lifetime of sustained measurement accuracy.
Because the force exerted by the fluid flowing through the meter is at right angles to the faces of the displacement rotors and the rotor shafts are always in a horizontal plane, there is no axial thrust, thereby eliminating wear between the rotors and the bearing plates and ultimately providing a lifetime of measurement accuracy!
Meters by Series
M-Series Meters
MA Series Meters
MA-Series meters class 10 meters are the industry standard for safe and accurate transfer of LPG and anhydrous ammonia (NH3).
MSA Series
MSA Series Meters are ideal for high flow measurement of LPG loading and unloading of tankers, storage tanks, and railcars.
MSAA Series
MSA & MSAA Series Meters are ideal for bulk measurement during loading and unloading of tanks, railcars, ships, and barges.
Specifications by Meter Model
M-5® meters are used in refined petroleum products, aviation fuels, LPG, agricultural chemicals, paints and coatings, foods and beverages, petrochemicals, pharmaceuticals, cosmetics, printing inks, textiles
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 2 | Aviation and jet fuel | Ni-Resist* |
| 3 | Liquid sugars, sweeteners, syrups, vegetable oils | Ni-Resist* |
| 4 | Treated waters and solvents where no red metals are allowed | Carbon |
| 8 | Acid pH liquids including: Nitric acid, phosphoric acid, glacial acetic acids, citric juices, vinegar | Carbon** |
| 14 | Crude oil | Ni-Resist |
| 16 | General solvents | Carbon |
*carbon bearings are standard on some meter sizes of this class, please consult factory.
*Teflon bearings optional on some meter sizes, please consult factory.
M-5® Specs
- Rating: 60 GPM (227 LPM), 150 psi (10.3 bar, 1034 kPa)
- Flange: 1-1/2″, 2″
- Meter Construction: Aluminum or Stainless Steel
- Seals: Buna/Viton®/EPDM as noted by catalog number
- Maximum Pressure: 150psi (as listed by catalog number)
- Temperature: -40° to 185° F
M-7® meters are used in refined petroleum products, aviation fuels, LPG, agricultural chemicals, paints and coatings, foods and beverages, petrochemicals, pharmaceuticals, cosmetics, printing inks, textiles, diesel exhaust fluid (DEF)
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 2 | Aviation and jet fuel | Ni-Resist* |
| 3 | Liquid sugars, sweeteners, syrups, vegetable oils | Ni-Resist* |
| 4 | Treated waters and solvents where no red metals are allowed | Carbon |
| 8 | Acid pH liquids including: Nitric acid, phosphoric acid, glacial acetic acids, citric juices, vinegar | Carbon** |
| 14 | Crude oil | Ni-Resist |
| 16 | General solvents | Carbon |
| 18 | Diesel exhaust fluid (DEF) | Ni-Resist |
*carbon bearings are standard on some meter sizes of this class, please consult factory.
*Teflon bearings optional on some meter sizes, please consult factory.
M-7® Specs
- Rating: 100 GPM (378 LPM), 150 psi (10.3 bar, 1034 kPa)
- Flange: 1-1/2″, 2″
- Meter Construction: Aluminum or Stainless Steel
- Seals: Buna/Viton®/EPDM as noted by catalog number
- Maximum Pressure: 150psi (as listed by catalog number)
- Temperature: -40° to 185° F
M-10® Meters for metering refined petroleum products such as leaded and unleaded gasoline, aviation fuels, fuel oils, diesel fuel, kerosene, and ethylene glycol (antifreeze) at rated capacity.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 2 | Aviation and jet fuel | Ni-Resist* |
*(carbon bearings are standard on some meter sizes of this class, please consult factory)
M-10® Specs
- Rating: 100 GPM (378 LPM), 150 psi (10.3 bar, 1034 kPa)
- Flange: 2″
- Meter Construction: Aluminum or Stainless Steel
- Seals: Buna/Viton®/EPDM as noted by catalog number
- Maximum Pressure: 150psi (as listed by catalog number)
- Temperature: -40° to 185° F
M-15® meters are used in refined petroleum products, aviation fuels, agricultural chemicals, paints and coatings, foods and beverages, petrochemicals, pharmaceuticals, cosmetics, printing inks, textiles
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 2 | Aviation and jet fuel | Ni-Resist* |
| 3 | Liquid sugars, sweeteners, syrups, vegetable oils | Ni-Resist* |
| 4 | Treated waters and solvents where no red metals are allowed | Carbon |
| 14 | Crude oil | Ni-Resist |
| 16 | General solvents | Carbon |
*(carbon bearings are standard on some meter sizes of this class, please consult factory)
M-15® Specs
- Rating: 200 GPM (756 LPM), 150 psi (10.3 bar, 1034 kPa)
- Flange: 1.5″, 2″
- Meter Construction: Aluminum or Stainless Steel
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 150psi (as listed by catalog number)
- Temperature: -40° to 185° F
- Bearing Material Recommended: Ni-Resist (carbon bearings are standard on some meter sizes of this class, please consult factory)
M-25® Meters for metering refined petroleum products such as leaded and unleaded gasoline, aviation fuels, fuel oils, diesel fuel, kerosene, and ethylene glycol (antifreeze) at rated capacity.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 2 | Aviation and jet fuel | Ni-Resist* |
*(carbon bearings are standard on some meter sizes of this class, please consult factory)
M-25® Specs
- Rating: 300 GPM (1134 LPM), 150 psi (10.3 bar, 1034 kPa)
- Flange: 3″
- Meter Construction: Aluminum
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 150psi (as listed by catalog number)
- Temperature: -40° to 185° F
M-30® meters are used in refined petroleum products, aviation fuels, agricultural chemicals, paints and coatings, foods and beverages, petrochemicals, pharmaceuticals, cosmetics, printing inks, textiles
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 2 | Aviation and jet fuel | Ni-Resist* |
| 3 | Liquid sugars, sweeteners, syrups, vegetable oils | Ni-Resist* |
| 4 | Treated waters and solvents where no red metals are allowed | Carbon |
| 14 | Crude oil | Ni-Resist |
| 16 | General solvents | Carbon |
*(carbon bearings are standard on some meter sizes of this class, please consult factory)
M-30® Specs
- Rating: 350 GPM (1323 LPM), 150 psi (10.3 bar, 1034 kPa)
- Flange: 4″
- Meter Construction: Aluminum
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 150psi (as listed by catalog number)
- Temperature: -40° to 185° F
- Bearing Material Recommended: Ni-Resist (carbon bearings are standard on some meter sizes of this class, please consult factory)
M-40® Meters for metering refined petroleum products such as leaded and unleaded gasoline, aviation fuels, fuel oils, diesel fuel, kerosene, and ethylene glycol (antifreeze) at rated capacity.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 2 | Aviation and jet fuel | Ni-Resist* |
*(carbon bearings are standard on some meter sizes of this class, please consult factory)
M-40® Specs
- Rating: 450 GPM (1701 LPM), 150 psi (10.3 bar, 1034 kPa)
- Flange: 4″
- Meter Construction: Aluminum
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 150psi (as listed by catalog number)
- Temperature: -40° to 185° F
M-40® AVI Meters for metering all classes of aviation fuels.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 2 | Aviation fuels including jet A, jet A-1, avgas | Ni-Resist* |
*(carbon bearings are standard on some meter sizes of this class, please consult factory)
M-40® AVI Specs
- Rating: 600 GPM (2268 LPM), 275 psi (19 bar, 1900 kPa);
- Flange: 4″
- Meter Construction: Aluminum
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 275 psi (as listed by catalog number)
- Temperature: -40° to 185° F
M-60® Meters for metering refined petroleum products such as leaded and unleaded gasoline, aviation fuels, fuel oils, diesel fuel, kerosene, ethylene glycol (antifreeze), as well as crude oil.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 2 | Aviation and jet fuel | Ni-Resist* |
| 3 | Liquid sugars, sweeteners, syrups, vegetable oils | Ni-Resist* |
| 4 | Treated waters and solvents where no red metals are allowed | Carbon |
| 16 | Alternative fuels and solvents, Methanol, Xylene, Naptha, Acetone, MEK, MIBK, and Alcohols (including 200 proof ethanol) | Ni-Resist |
*(carbon bearings are standard on some meter sizes of this class, please consult factory)
M-60® Specs
- Rating: 600 GPM (2268 LPM), 150 psi (10.3 bar, 1034 kPa)
- Flange: 4″
- Meter Construction: Aluminum
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 275 psi (as listed by catalog number)
- Temperature: -40° to 185° F
M-80® Meters for metering all classes of aviation fuels.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 2 | Aviation fuels including jet A, jet A-1, avgas | Ni-Resist* |
*(carbon bearings are standard on some meter sizes of this class, please consult factory)
M-80® Specs
- Rating:
- (4″) – 600 GPM (2268 LPM), 275 psi (19 bar, 1900 kPa);
- (6″) – 1000 GPM (38 LPM), 275 psi (19 bar, 1900 kPa)
- Flange: 4″, 6″
- Meter Construction: Aluminum
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 275 psi (as listed by catalog number)
- Temperature: -40° to 185° F
MA-4® meters are used in low flow LPG applications such as dispensing and bottle filling of LPG gasses.
| Meter Class | Description | Bearing Material |
|---|---|---|
| 10 | Liquified petroleum gas (LPG) such as propane | Carbon |
MA-4® Specs
- Rating: 30 GPM (114 LPM), 350 psi (24.1 bar, 2414 kPa)
- Flange: 1″
- Meter Construction: Aluminum
- Seals: Buna N
- Maximum Pressure: 350 psi (as listed by catalog number)
- Temperature: -40° to 160° F (-40° to 71.1° C)
- Hazardous Location Rating: Class 1, Division I, Group D (LPG)
- Enclosure: NEMA 4X
- Safety: NFPA 58, UL 25
MA-5® meters are used in lower flow LPG applications.
| Meter Class | Description | Bearing Material |
|---|---|---|
| 10 | Liquified petroleum gas (LPG) such as propane | Carbon |
MA-5® Specs
- Rating: 60 GPM (227 LPM), 350 psi (24 bar, 2414 kPa)
- Flange: 1.5″, 2″
- Meter Construction: Aluminum
- Seals: Buna N, Viton
- Maximum Pressure: 350 psi (as listed by catalog number)
- Temperature: -40° to 160° F (-40° to 71.1° C)
- Hazardous Location Rating: Class 1, Division I, Group D (LPG)
- Enclosure: NEMA 4X
- Safety: NFPA 58, UL 25
MA-7® meters are most commonly used truck based (bobtail) LPG delivery applications as well as anhydrous ammonia.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 10 | Liquified petroleum gas (LPG) such as propane | Carbon |
| 12 | Anhydrous Ammonia (NH3) | Carbon |
MA-7® Specs
- Rating: 100 GPM (378 LPM), 350 psi (24 bar, 2414 kPa)
- Flange: 2″
- Meter Construction: Aluminum
- Seals: Buna N, Viton
- Maximum Pressure: 350 psi (as listed by catalog number)
- Temperature: -40° to 160° F (-40° to 71.1° C)
- Hazardous Location Rating: Class 1, Division I, Group D (LPG)
- Enclosure: NEMA 4X
- Safety: NFPA 58, UL 25
MA-15® meters are used in LPG bulk metering applications.
| Meter Class | Description | Bearing Material |
|---|---|---|
| 10 | Liquified petroleum gas (LPG) such as propane | Carbon |
MA-15® Specs
- Rating: 200 GPM (756 LPM), 350 psi (24 bar, 2414 kPa)
- Flange: 3″ (or 3″ in and 2″out)
- Meter Construction: Aluminum
- Seals: Buna N, Viton
- Maximum Pressure: 350 psi (as listed by catalog number)
- Temperature: -40° to 160° F (-40° to 71.1° C)
- Hazardous Location Rating: Class 1, Division I, Group D (LPG)
- Enclosure: NEMA 4X
- Safety: NFPA 58, UL 25
MSA-30™ meters are used in higher flow LPG transfer applications Including: Propane, butane, isobutane, pentane, ethane, and refrigerants
| Meter Class | Description | Bearing Material |
|---|---|---|
| 10 | LPG | Carbon |
MSA-30™ Specs
- Rating: 350 GPM (1325 LPM), 300 psi (20.7 bar, 2068 kPa)
- Flange: 3″
- Meter Construction: Aluminum with Steel Case
- Seals: Buna
- Flanges: 300# ANSI RF flanges
- Maximum Pressure: 350 psi
- Temperature: -40° to 185° F
MSA-75™ meters are used in high flow LPG transfer applications Including: Propane, butane, isobutane, pentane, ethane, and refrigerants.
| Meter Class | Description | Bearing Material |
|---|---|---|
| 10 | LPG | Carbon |
MSA-75™ Specs
- Rating: 700 GPM (2650 LPM), 300 psi (20.7 bar, 2068 kPa)
- Flange: 4″
- Meter Construction: Aluminum with Steel Case
- Seals: Buna
- Flanges: 300# ANSI RF flanges
- Maximum Pressure: 350 psi
- Temperature: -40° to 185° F
MSAA-30™ meters for refined petroleum products, leaded and unleaded gasoline, fuel oils, diesel fuel, kerosene, ethylene glycol (antifreeze), propylene glycol at rated capacity. Also used with alternative fuels, solvents, motor oils, crop oils and rotogravure ink at reduced rates of flow.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 16 | Alternative fuels and solvents | Carbon |
*carbon bearings are standard on some meter sizes of this class, please consult factory.
MSAA-30™ Specs
- Rating: 350 GPM (1325 LPM), 285 psi (19.7 bar, 1965 kPa)
- Flange: 3″
- Meter Construction: Steel Case, Aluminum Element
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 285 psi (as listed by catalog number)
- Temperature: -40° to 185° F
MSAA-40™ meters for refined petroleum products, leaded and unleaded gasoline, fuel oils, diesel fuel, kerosene, ethylene glycol (antifreeze), propylene glycol at rated capacity. Also used with alternative fuels, solvents, motor oils, crop oils and rotogravure ink at reduced rates of flow.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 16 | Alternative fuels and solvents | Carbon |
*carbon bearings are standard on some meter sizes of this class, please consult factory.
MSAA-40™ Specs
- Rating: 450 GPM (1703 LPM), 285 psi (19.7 bar, 1965 kPa)
- Flange: 3″
- Meter Construction: Steel Case, Aluminum Element
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 285 psi (as listed by catalog number)
- Temperature: -40° to 185° F
MSAA-75™ meters for refined petroleum products, leaded and unleaded gasoline, fuel oils, diesel fuel, kerosene, ethylene glycol (antifreeze), propylene glycol at rated capacity. Also used with alternative fuels, solvents, motor oils, crop oils and rotogravure ink at reduced rates of flow.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 16 | Alternative fuels and solvents | Carbon |
*carbon bearings are standard on some meter sizes of this class, please consult factory.
MSAA-75™ Specs
- Rating: 700 GPM (2650 LPM), 285 psi (19.7 bar, 1965 kPa)
- Flange: 4″
- Meter Construction: Steel Case, Aluminum Element
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 285 psi (as listed by catalog number)
- Temperature: -40° to 185° F
MSAA-120™ meters for refined petroleum products, leaded and unleaded gasoline, fuel oils, diesel fuel, kerosene, ethylene glycol (antifreeze), propylene glycol at rated capacity. Also used with alternative fuels, solvents, motor oils, crop oils and rotogravure ink at reduced rates of flow.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 16 | Alternative fuels and solvents | Carbon |
*carbon bearings are standard on some meter sizes of this class, please consult factory.
MSAA-120™ Specs
- Rating: 1000 GPM (3785 LPM), 285 psi (19.7 bar, 1965 kPa)
- Flange: 6″
- Meter Construction: Steel Case, Aluminum Element
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 285 psi (as listed by catalog number)
- Temperature: -40° to 185° F
Specifications by Meter Model
M-5® meters are used in refined petroleum products, aviation fuels, LPG, agricultural chemicals, paints and coatings, foods and beverages, petrochemicals, pharmaceuticals, cosmetics, printing inks, textiles
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 2 | Aviation and jet fuel | Ni-Resist* |
| 3 | Liquid sugars, sweeteners, syrups, vegetable oils | Ni-Resist* |
| 4 | Treated waters and solvents where no red metals are allowed | Carbon |
| 8 | Acid pH liquids including: Nitric acid, phosphoric acid, glacial acetic acids, citric juices, vinegar | Carbon** |
| 14 | Crude oil | Ni-Resist |
| 16 | General solvents | Carbon |
*carbon bearings are standard on some meter sizes of this class, please consult factory.
*Teflon bearings optional on some meter sizes, please consult factory.
M-5® Specs
- Rating: 60 GPM (227 LPM), 150 psi (10.3 bar, 1034 kPa)
- Flange: 1-1/2″, 2″
- Meter Construction: Aluminum or Stainless Steel
- Seals: Buna/Viton®/EPDM as noted by catalog number
- Maximum Pressure: 150psi (as listed by catalog number)
- Temperature: -40° to 185° F
M-7® meters are used in refined petroleum products, aviation fuels, LPG, agricultural chemicals, paints and coatings, foods and beverages, petrochemicals, pharmaceuticals, cosmetics, printing inks, textiles, diesel exhaust fluid (DEF)
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 2 | Aviation and jet fuel | Ni-Resist* |
| 3 | Liquid sugars, sweeteners, syrups, vegetable oils | Ni-Resist* |
| 4 | Treated waters and solvents where no red metals are allowed | Carbon |
| 8 | Acid pH liquids including: Nitric acid, phosphoric acid, glacial acetic acids, citric juices, vinegar | Carbon** |
| 14 | Crude oil | Ni-Resist |
| 16 | General solvents | Carbon |
| 18 | Diesel exhaust fluid (DEF) | Ni-Resist |
*carbon bearings are standard on some meter sizes of this class, please consult factory.
*Teflon bearings optional on some meter sizes, please consult factory.
M-7® Specs
- Rating: 100 GPM (378 LPM), 150 psi (10.3 bar, 1034 kPa)
- Flange: 1-1/2″, 2″
- Meter Construction: Aluminum or Stainless Steel
- Seals: Buna/Viton®/EPDM as noted by catalog number
- Maximum Pressure: 150psi (as listed by catalog number)
- Temperature: -40° to 185° F
M-10® Meters for metering refined petroleum products such as leaded and unleaded gasoline, aviation fuels, fuel oils, diesel fuel, kerosene, and ethylene glycol (antifreeze) at rated capacity.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 2 | Aviation and jet fuel | Ni-Resist* |
*(carbon bearings are standard on some meter sizes of this class, please consult factory)
M-10® Specs
- Rating: 100 GPM (378 LPM), 150 psi (10.3 bar, 1034 kPa)
- Flange: 2″
- Meter Construction: Aluminum or Stainless Steel
- Seals: Buna/Viton®/EPDM as noted by catalog number
- Maximum Pressure: 150psi (as listed by catalog number)
- Temperature: -40° to 185° F
M-15® meters are used in refined petroleum products, aviation fuels, agricultural chemicals, paints and coatings, foods and beverages, petrochemicals, pharmaceuticals, cosmetics, printing inks, textiles
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 2 | Aviation and jet fuel | Ni-Resist* |
| 3 | Liquid sugars, sweeteners, syrups, vegetable oils | Ni-Resist* |
| 4 | Treated waters and solvents where no red metals are allowed | Carbon |
| 14 | Crude oil | Ni-Resist |
| 16 | General solvents | Carbon |
*(carbon bearings are standard on some meter sizes of this class, please consult factory)
M-15® Specs
- Rating: 200 GPM (756 LPM), 150 psi (10.3 bar, 1034 kPa)
- Flange: 1.5″, 2″
- Meter Construction: Aluminum or Stainless Steel
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 150psi (as listed by catalog number)
- Temperature: -40° to 185° F
- Bearing Material Recommended: Ni-Resist (carbon bearings are standard on some meter sizes of this class, please consult factory)
M-25® Meters for metering refined petroleum products such as leaded and unleaded gasoline, aviation fuels, fuel oils, diesel fuel, kerosene, and ethylene glycol (antifreeze) at rated capacity.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 2 | Aviation and jet fuel | Ni-Resist* |
*(carbon bearings are standard on some meter sizes of this class, please consult factory)
M-25® Specs
- Rating: 300 GPM (1134 LPM), 150 psi (10.3 bar, 1034 kPa)
- Flange: 3″
- Meter Construction: Aluminum
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 150psi (as listed by catalog number)
- Temperature: -40° to 185° F
M-30® meters are used in refined petroleum products, aviation fuels, agricultural chemicals, paints and coatings, foods and beverages, petrochemicals, pharmaceuticals, cosmetics, printing inks, textiles
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 2 | Aviation and jet fuel | Ni-Resist* |
| 3 | Liquid sugars, sweeteners, syrups, vegetable oils | Ni-Resist* |
| 4 | Treated waters and solvents where no red metals are allowed | Carbon |
| 14 | Crude oil | Ni-Resist |
| 16 | General solvents | Carbon |
*(carbon bearings are standard on some meter sizes of this class, please consult factory)
M-30® Specs
- Rating: 350 GPM (1323 LPM), 150 psi (10.3 bar, 1034 kPa)
- Flange: 4″
- Meter Construction: Aluminum
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 150psi (as listed by catalog number)
- Temperature: -40° to 185° F
- Bearing Material Recommended: Ni-Resist (carbon bearings are standard on some meter sizes of this class, please consult factory)
M-40® Meters for metering refined petroleum products such as leaded and unleaded gasoline, aviation fuels, fuel oils, diesel fuel, kerosene, and ethylene glycol (antifreeze) at rated capacity.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 2 | Aviation and jet fuel | Ni-Resist* |
*(carbon bearings are standard on some meter sizes of this class, please consult factory)
M-40® Specs
- Rating: 450 GPM (1701 LPM), 150 psi (10.3 bar, 1034 kPa)
- Flange: 4″
- Meter Construction: Aluminum
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 150psi (as listed by catalog number)
- Temperature: -40° to 185° F
M-40® AVI Meters for metering all classes of aviation fuels.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 2 | Aviation fuels including jet A, jet A-1, avgas | Ni-Resist* |
*(carbon bearings are standard on some meter sizes of this class, please consult factory)
M-40® AVI Specs
- Rating: 600 GPM (2268 LPM), 275 psi (19 bar, 1900 kPa);
- Flange: 4″
- Meter Construction: Aluminum
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 275 psi (as listed by catalog number)
- Temperature: -40° to 185° F
M-60® Meters for metering refined petroleum products such as leaded and unleaded gasoline, aviation fuels, fuel oils, diesel fuel, kerosene, ethylene glycol (antifreeze), as well as crude oil.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 2 | Aviation and jet fuel | Ni-Resist* |
| 3 | Liquid sugars, sweeteners, syrups, vegetable oils | Ni-Resist* |
| 4 | Treated waters and solvents where no red metals are allowed | Carbon |
| 16 | Alternative fuels and solvents, Methanol, Xylene, Naptha, Acetone, MEK, MIBK, and Alcohols (including 200 proof ethanol) | Ni-Resist |
*(carbon bearings are standard on some meter sizes of this class, please consult factory)
M-60® Specs
- Rating: 600 GPM (2268 LPM), 150 psi (10.3 bar, 1034 kPa)
- Flange: 4″
- Meter Construction: Aluminum
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 275 psi (as listed by catalog number)
- Temperature: -40° to 185° F
M-80® Meters for metering all classes of aviation fuels.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 2 | Aviation fuels including jet A, jet A-1, avgas | Ni-Resist* |
*(carbon bearings are standard on some meter sizes of this class, please consult factory)
M-80® Specs
- Rating:
- (4″) – 600 GPM (2268 LPM), 275 psi (19 bar, 1900 kPa);
- (6″) – 1000 GPM (38 LPM), 275 psi (19 bar, 1900 kPa)
- Flange: 4″, 6″
- Meter Construction: Aluminum
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 275 psi (as listed by catalog number)
- Temperature: -40° to 185° F
MA-4® meters are used in low flow LPG applications such as dispensing and bottle filling of LPG gasses.
| Meter Class | Description | Bearing Material |
|---|---|---|
| 10 | Liquified petroleum gas (LPG) such as propane | Carbon |
MA-4® Specs
- Rating: 30 GPM (114 LPM), 350 psi (24.1 bar, 2414 kPa)
- Flange: 1″
- Meter Construction: Aluminum
- Seals: Buna N
- Maximum Pressure: 350 psi (as listed by catalog number)
- Temperature: -40° to 160° F (-40° to 71.1° C)
- Hazardous Location Rating: Class 1, Division I, Group D (LPG)
- Enclosure: NEMA 4X
- Safety: NFPA 58, UL 25
MA-5® meters are used in lower flow LPG applications.
| Meter Class | Description | Bearing Material |
|---|---|---|
| 10 | Liquified petroleum gas (LPG) such as propane | Carbon |
MA-5® Specs
- Rating: 60 GPM (227 LPM), 350 psi (24 bar, 2414 kPa)
- Flange: 1.5″, 2″
- Meter Construction: Aluminum
- Seals: Buna N, Viton
- Maximum Pressure: 350 psi (as listed by catalog number)
- Temperature: -40° to 160° F (-40° to 71.1° C)
- Hazardous Location Rating: Class 1, Division I, Group D (LPG)
- Enclosure: NEMA 4X
- Safety: NFPA 58, UL 25
MA-7® meters are most commonly used truck based (bobtail) LPG delivery applications as well as anhydrous ammonia.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 10 | Liquified petroleum gas (LPG) such as propane | Carbon |
| 12 | Anhydrous Ammonia (NH3) | Carbon |
MA-7® Specs
- Rating: 100 GPM (378 LPM), 350 psi (24 bar, 2414 kPa)
- Flange: 2″
- Meter Construction: Aluminum
- Seals: Buna N, Viton
- Maximum Pressure: 350 psi (as listed by catalog number)
- Temperature: -40° to 160° F (-40° to 71.1° C)
- Hazardous Location Rating: Class 1, Division I, Group D (LPG)
- Enclosure: NEMA 4X
- Safety: NFPA 58, UL 25
MA-15® meters are used in LPG bulk metering applications.
| Meter Class | Description | Bearing Material |
|---|---|---|
| 10 | Liquified petroleum gas (LPG) such as propane | Carbon |
MA-15® Specs
- Rating: 200 GPM (756 LPM), 350 psi (24 bar, 2414 kPa)
- Flange: 3″ (or 3″ in and 2″out)
- Meter Construction: Aluminum
- Seals: Buna N, Viton
- Maximum Pressure: 350 psi (as listed by catalog number)
- Temperature: -40° to 160° F (-40° to 71.1° C)
- Hazardous Location Rating: Class 1, Division I, Group D (LPG)
- Enclosure: NEMA 4X
- Safety: NFPA 58, UL 25
MSA-30™ meters are used in higher flow LPG transfer applications Including: Propane, butane, isobutane, pentane, ethane, and refrigerants
| Meter Class | Description | Bearing Material |
|---|---|---|
| 10 | LPG | Carbon |
MSA-30™ Specs
- Rating: 350 GPM (1325 LPM), 300 psi (20.7 bar, 2068 kPa)
- Flange: 3″
- Meter Construction: Aluminum with Steel Case
- Seals: Buna
- Flanges: 300# ANSI RF flanges
- Maximum Pressure: 350 psi
- Temperature: -40° to 185° F
MSA-75™ meters are used in high flow LPG transfer applications Including: Propane, butane, isobutane, pentane, ethane, and refrigerants.
| Meter Class | Description | Bearing Material |
|---|---|---|
| 10 | LPG | Carbon |
MSA-75™ Specs
- Rating: 700 GPM (2650 LPM), 300 psi (20.7 bar, 2068 kPa)
- Flange: 4″
- Meter Construction: Aluminum with Steel Case
- Seals: Buna
- Flanges: 300# ANSI RF flanges
- Maximum Pressure: 350 psi
- Temperature: -40° to 185° F
MSAA-30™ meters for refined petroleum products, leaded and unleaded gasoline, fuel oils, diesel fuel, kerosene, ethylene glycol (antifreeze), propylene glycol at rated capacity. Also used with alternative fuels, solvents, motor oils, crop oils and rotogravure ink at reduced rates of flow.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 16 | Alternative fuels and solvents | Carbon |
*carbon bearings are standard on some meter sizes of this class, please consult factory.
MSAA-30™ Specs
- Rating: 350 GPM (1325 LPM), 285 psi (19.7 bar, 1965 kPa)
- Flange: 3″
- Meter Construction: Steel Case, Aluminum Element
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 285 psi (as listed by catalog number)
- Temperature: -40° to 185° F
MSAA-40™ meters for refined petroleum products, leaded and unleaded gasoline, fuel oils, diesel fuel, kerosene, ethylene glycol (antifreeze), propylene glycol at rated capacity. Also used with alternative fuels, solvents, motor oils, crop oils and rotogravure ink at reduced rates of flow.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 16 | Alternative fuels and solvents | Carbon |
*carbon bearings are standard on some meter sizes of this class, please consult factory.
MSAA-40™ Specs
- Rating: 450 GPM (1703 LPM), 285 psi (19.7 bar, 1965 kPa)
- Flange: 3″
- Meter Construction: Steel Case, Aluminum Element
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 285 psi (as listed by catalog number)
- Temperature: -40° to 185° F
MSAA-75™ meters for refined petroleum products, leaded and unleaded gasoline, fuel oils, diesel fuel, kerosene, ethylene glycol (antifreeze), propylene glycol at rated capacity. Also used with alternative fuels, solvents, motor oils, crop oils and rotogravure ink at reduced rates of flow.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 16 | Alternative fuels and solvents | Carbon |
*carbon bearings are standard on some meter sizes of this class, please consult factory.
MSAA-75™ Specs
- Rating: 700 GPM (2650 LPM), 285 psi (19.7 bar, 1965 kPa)
- Flange: 4″
- Meter Construction: Steel Case, Aluminum Element
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 285 psi (as listed by catalog number)
- Temperature: -40° to 185° F
MSAA-120™ meters for refined petroleum products, leaded and unleaded gasoline, fuel oils, diesel fuel, kerosene, ethylene glycol (antifreeze), propylene glycol at rated capacity. Also used with alternative fuels, solvents, motor oils, crop oils and rotogravure ink at reduced rates of flow.
| Meter Classes | Description | Bearing Material |
|---|---|---|
| 1 | Refined petroleum products | Ni-Resist* |
| 16 | Alternative fuels and solvents | Carbon |
*carbon bearings are standard on some meter sizes of this class, please consult factory.
MSAA-120™ Specs
- Rating: 1000 GPM (3785 LPM), 285 psi (19.7 bar, 1965 kPa)
- Flange: 6″
- Meter Construction: Steel Case, Aluminum Element
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 285 psi (as listed by catalog number)
- Temperature: -40° to 185° F
Fluids by Meter Class
Refined petroleum products such as gasoline, fuel oils, motor oils, diesel fuel, kerosene, ethylene glycol, and propylene glycol at rated capacity.
- Meter Models: M-5®, M-7®, M10®, M-15®, M-25®, M-30®, M-40®, M-60®, MSAA-30™, MSAA-40™, MSAA-75™, MSAA-120™
- Meter Construction: M-Series: Aluminum; MSAA-Series: Steel case with aluminum element
- Seals: Buna/Viton® as noted by catalog number
- Maximum Pressure: 150psi (as listed by catalog number)
- Temperature: -40° to 185° F
- Bearing Material: Ni-Resist (carbon bearings are standard on some meter sizes of this class, please consult factory)
Aviation Fuels including Jet-A, Jet-A1, JP-8, Avgas fuels
- Meter Models: M-5®, M-7®, M10®, M-15®, M-25®, M-30®, M-40®, M-40®AVI, M-60®, M-80®, MSAA-30™, MSAA-40™, MSAA-75™, MSAA-120™
- Meter Construction: M-Series: Aluminum; MSAA-Series: Steel case with aluminum element
- Seals: Buna
- Maximum Pressure: 150/275/285 psi (*as listed by catalog number)
- Temperature: -40° to 185° F
- Bearing Material: Ni-Resist (carbon bearings are standard on some meter sizes of this class, please consult factory)
Liquid Sweeteners and Syrups such as Dextrose, Fructose, Sucrose, Maltose, Lactose. Also Corn Oil, Soy Bean, Cotton Seed and Coconut Oils, Shortenings
- Meter Models: M-7®, M-15®
- Meter Construction: Aluminum
- Seals: Buna
- Maximum Pressure: 150psi
- Temperature: -40° to 185° F
- Bearing Material: Ni-Resist
Treated waters such as potted, deionized, and demineralized water, windshield washer fluid and solvents where no red metals are allowed
- Meter Models: M-5®, M-7®
- Meter Construction: Aluminum
- Seals: Buna
- Maximum Pressure: 150psi
- Temperature: -40° to 185° F
- Bearing Material: Carbon
Acidic pH Liquids including nitric, phosphoric and glacial acetic acids, fruit juices, vinegar, distilled water
- Meter Models: M-7®
- Meter Construction: Stainless Steel
- Seals: Viton, PTFE
- Maximum Pressure: 150 psi
- Temperature: -40° to 185° F
- Bearing Material: Carbon (PTFE bearings optional on some meter sizes, please consult factory)
Liquified Petroleum Gas [LPG] including propane, butane, isobutane, pentane, ethane, and refrigerants.
- Meter Models: MA-4®, MA-5®, MA-7®, MA-15®, MSA-30, MSA-75
- Meter Construction: MA-Series: Aluminum; MSA-Series: Aluminum with Steel Case
- Seals: Buna
- Maximum Pressure: 350 psi
- Temperature: -40° to 185° F
- Bearing Material: Carbon
Anhydrous Ammonia (NH3)
- Meter Models: MA-7®, MA-15®
- Meter Construction: Aluminum
- Seals: Buna/EPDM
- Maximum Pressure: 350 psi
- Temperature: -40° to 185° F
- Bearing Material: Carbon
High Viscosity Liquids such as crude oil, LACT, NOD, heated and/or viscous liquids including: animal fats, resins, #6 oil, non-abrasive asphalt emulsions.
- Meter Models: M-7®, M-30®, MSAA-75™
- Meter Construction: M-Series: Aluminum; MSAA-Series: Steel Case, aluminum element
- Seals: Viton®
- Maximum Pressure: 150-285 psi (refer to catalog for specific pressure by model)
- Temperature: -40° to 185° F
- Bearing Material: Ni-Resist
General Solvents, methanol, xylene, naptha, acetone, MEK, MIBK, and alcohols (including 200 proof ethanol)
- Meter Models: M-5®, M-7®, M-15®, M-30®, M-60®, MSAA-30™, MSAA-75™
- Meter Construction: M-Series: Aluminum; MSAA-Series: Steel Case, Aluminum Element
- Seals: Buna, Viton® or PTFE as noted by catalog number
- Maximum Pressure: 150-285 psi (as listed by catalog number)
- Temperature: -40° to 185° F
- Bearing Material: Carbon
Diesel Exhaust Fluid (DEF): Diesel Exhaust Fluid, is composed of deionized water & urea. The urea in DEF solution is used by the
engine’s SCR system to convert smog producing chemicals into simple nitrogen and water.
- Meter Model: M-7®
- Meter Construction: Stainless Steel / Advanced Polymer
- Seals: EPDM
- Approved for flow rates of 5 to 100 gpm (20:1 range)
- Maximum Pressure: 150 psi (Low Pressure drop)
- Temperature: 32 to 100° F