
- Features
- Specs
- Available in 2”, 3” & 4” (EP7, EP15, & EP30)
- Low Pressure Drop
- High Flow Rate
- 2-Stage Preset Valve
- Ideal for High Viscosity Petroleum Products
- Controlled by LCR-II or LCR600 registration and a truck’s air system. The LCR600 is recommended in lubrication oil applications due to the 16 product calibrations in memory.
The Liquid Controls EP series electro-pneumatic, 2-stage preset valves are designed to control the flow of refined petroleum products including: diesel, gasoline, fuel oils, kerosene, ethylene glycol, and lube oils. These valves can be integrated into a complete Liquid Controls positive displacement metering system containing a meter with electronic registration. Due to the less restrictive design, EP series provide the benefit of reduced pressure drop and higher potential flow rates, especially when handling higher-viscosity products.
- Temperature Rating
- -4° to 158°F (-20° to 70°C)
- Pressure Rating
- Maximum non-shock working pressure: 150 PSI (10.5 BAR)
- Environmental Rating
- Meets ATEX 94/9/EC Requirements
- Max Flow Rate
- 132 GPM (500 L/min)
- Viscosity Range
- 30 to 20,000* SSU
*Consult Factory for Higher Viscosity Liquid Applications
- Products
- Refined Fuels (gasoline, fuel oils, diesel, kerosene, ethylene glycol, and lube oils)
- Safety
- Meets PED 97/23/EC Requirements
- Materials of Construction
- Valve Body: Aluminum
- Elastomers: Viton internal O-rings, Buna external O-rings
- Solenoids (Available Separately)
- Voltage: 12 VDC
- Maximum Pressure: 145 psi
- Two-Stage Operation
- Reduced Flow Adjustable from 0 to 15% of full flow
- Recommended Regulated Air Pressure: 75-85 PSI